What Correx Boards Are Used For
Correx boards are fluted plastic signs made from polypropylene sheet. They are light in weight, easy to handle and ideal when you need a clean sign for a limited period rather than a permanent board. They work well for estate agent listings, sale notices, event directions, open days, parking instructions and short-run promotional campaigns.
Because the material is rigid but lightweight, it is easy to mount on walls, posts, gates, fences and temporary frames. In Boksburg and the rest of the East Rand, correx is often chosen for construction notices, municipal compliance notices, school events and weekend specials where the sign must be clear, affordable and quick to replace.
- Temporary promotions and sales
- Event direction and parking control
- Construction and site notices
- Estate agent boards and property pointers
Sizes, Thicknesses and Print Options
We cut correx boards to the size you need, from small directional signs up to larger site boards. Standard sheet sizes are commonly used for quick turnaround work, but we can also make custom sizes to suit your fence line, window opening or post spacing. Typical thicknesses are 3 mm and 5 mm, with thicker options available for larger boards or where a bit more stiffness is needed.
Print can be one sided or double sided, depending on where the sign will be viewed from. We can include directional arrows, contact details, logos, opening times and simple graphics. If the board will sit in bright sun for long periods, darker colours and high contrast text usually stay easier to read. For coastal or high-dust areas, simple layouts are often best because they remain legible after weather and cleaning.
- Custom cut to size
- 3 mm and 5 mm board options
- Single or double sided print
- Plain, branded or directional layouts
Where Correx Boards Work Best
These boards suit places where you need a fast sign that can be seen clearly from a road, pavement or entrance. They are very handy for short term campaigns and changing information, especially where you do not want to spend money on a heavier permanent board. On busy routes in Kempton Park, Germiston and Benoni, they are often used for temporary promotions that need to be refreshed every few weeks.
Correx is also useful on sites where access changes often. Contractors use them for entry signs, safety reminders and detour notices. Schools and churches use them for event days, fundraisers and visitor direction. Estate agents use them for open house boards, while retail stores use them for seasonal sales and one-day promotions. If the board must stay up for many months in strong sun, wind or salt air, we will advise where correx is suitable and where a firmer panel may be better.
- Retail specials and promotional campaigns
- Schools, churches and community events
- Construction sites and access notices
- Property listings and viewing directions
Installation, Mounting and Power Needs
Correx boards do not need power or gas. They are purely printed signage, so there is no electrical fitting and no ongoing energy use. Installation depends on where the board will go. We can fit them with cable ties, double sided tape, screws, stand-off fixings or simple frame mounting, depending on the surface and the expected weather exposure.
For temporary outdoor use, we often suggest fixing points that are easy to remove without damaging the board or the wall. On wire fencing or temporary site hoarding, cable ties are usually the quickest option. For a cleaner finish on a wall or gate, drilled fixings may be better. If the sign is going near an entrance used by vehicles, we also check safe clearance and visibility so the board does not get clipped. It’s a small detail, but it saves a lot of repair later.
- No power or gas required
- Can be tied, screwed or taped in place
- Suitable for walls, fences, gates and frames
- Installation planned around access and safety
Care, Weather Use and Replacement Timing
Correx boards are meant for temporary use, so they are easy to clean and easy to replace. A soft cloth, mild soap and water is usually enough for dust and road grime. Harsh solvents should be avoided because they can mark the print or dull the surface. In Gauteng wind and summer rain can put stress on any lightweight board, so the mounting method matters just as much as the print quality.
For long exposure in direct sunlight, colours may fade over time, especially on west-facing walls and open road frontages. On windy sites a board can bow or tear if it is not fixed properly. If a client needs the same message to stay up for a long period, we may recommend refreshing the board or moving to a more permanent material. Regular maintenance visits can help keep directional boards readable, and replacements can be done quickly when a campaign changes. Short-term signs should never look tired, because that can make the whole site look a bit neglected.
- Wipe with mild soap and water
- Avoid strong chemicals and rough scrubbing
- Check fixings after wind or heavy rain
- Replace when fading or bowing starts
What to Check Before You Order
Before we make your correx board, please check the message, size and fixing points carefully. A temporary sign still needs the same attention to detail as a permanent one, especially if it is going on a busy road or at a customer entrance. We can help with artwork setup, but it helps when you already know the exact wording, the direction of travel and how the board will be mounted.
Think about viewing distance too. A board meant for cars passing at speed needs larger lettering than a sign for pedestrians at a gate. If the board will be used in more than one location, we can keep the layout simple so the same sign works at different sites. When ordering, check whether you need one side or both, whether arrows must point left or right, and whether dates or prices might change later.
- Final wording and spelling
- Viewing distance and board size
- Mounting method and fixing points
- One sided or double sided print
- Whether the details may change later
Why Boksburg Clients Order Correx From Us
We have been making signs in Boksburg since 1988, so we understand what temporary signage needs to do in real conditions. It has to be legible, quick to install and practical to remove when the job is done. Our team handles site surveys, artwork setup, manufacture, delivery and installation across Ekurhuleni and greater Gauteng, including Boksburg, Benoni, Germiston, Kempton Park, Alberton, Springs, Edenvale and Midrand.
Michael Johannes van der Merwe leads the business with a team that includes Lerato Mokoena in sales, Johan Pretorius in production, Nokuthula Dlamini in client care, Sibusiso Khumalo on installations, Ayesha Patel on design and Pieter Erasmus in the workshop. That means your correx order is managed by people who know the practical side of signage, from fence mounting to short lead times. If you need a tidy board for a weekend promotion or a site notice that must go up tomorrow, we can assist without fuss.
Key facts
| Material | Fluted polypropylene correx sheet |
|---|---|
| Common thicknesses | 3 mm and 5 mm |
| Print options | Single sided or double sided |
| Typical uses | Promotions, events, site notices, property boards |
| Mounting | Cable ties, screws, tape, frames or stand-offs |
| Power or gas required | None |
